DSK control pendants

For direct control of drives up to 8.8 HP

DSK control pendants

DSK control pendants

Convenient control

Whether you need to control hoists or machinery, wire-connected DSK control pendants are the ideal solution.

    • High level of safety
    • For direct or contactor control
    • Ergonomic design and operation
    • Can be configured to meet a wide range of specific needs

    Your Contact

    Demag contact

    Demag Cranes and Components Corp.

    6675 Parkland Blvd., Suite 200
    Cleveland, Ohio 44139
    United States

    Phone:
    +1 (440) 248 2400
    Fax:
    +1 (440) 248 3874
    Email:
    demaginfo.us@demagcranes.com

    Product information

    The benefits at a glance

    High safety and reliability

    • Mechanical interlocking of the switching elements
    • Movements in opposite directions cannot be simultaneously actuated

    Performance to meet application requirements

    • Direct control of drives with motor outputs up to 8.8 HP (5.5 kW) by using various switching elements
    • Indirect control using contactors in the auxiliary circuit for higher outputs

    Convenient operation

    • Easy operation due to ergonomical housing design
    • Sloping control pendant design permits operators to work in a natural, comfortable posture

    Customisable

    • Can be configured to customer specifications (e.g. cable length)

    Technical data

    DSK series control pendants offer the following outstanding technical details:

    • Permissible ambient temperatures from -13 °F to +158 °F

    Safety

    • Strain relief by means of special hose with additional protective sleeve, as standard
    • Protective insulation to DIN VDE 0100 Part 410
    • Switching distances and forces to DIN 33401, holding force < 1.8 lb (8 N)
    • IP 55 enclosure to DIN VDE 0470 as standard in "suspended" operating position
    • IP65 on request

    Control

    • CBDN switching element (emergency stop) with positive opening of the NC contacts
    • Direct control of drives up to 8.8 HP (5.5 kW)
    • Simultaneous 2-pole switching for direct control
    • Switching elements for direct or contactor control

    Housing

    • High-quality thermoplastic housing that is highly resistant to impacts
    • Non-flammable, climate and corrision-proof
    • Highly resistant to fuels, salt water, grease, oils and alkaline solutions
    Main current switching elements
    Type CBD 1 CBD 2 CBDN
    Design Single-stage switching element
    2 NO
    Double-stage switching element
    2 NO in the 1st stage
    2 changeover contacts in the 2nd stage
    Single-stage crane switch
    (emergency stop), 3 NC
    Rated operating voltage [V] 230 400 500 230 400 500
    Rated operating current [A] 20 12 9 Ith 2 25  
    Utilisation category to
    DIN VDE 0660 /
    EN 60947 Main current
    AC 3, AC 4 AC 3, AC 4 for breaking capacity up to 5.5 kW
    Nominal insulation voltage Ui 500 V~ to DIN VDE 0110, CSA 300 VAC



     

    Control current switching element
    Type CBS 1 CBS 2
    Design Single-stage switching element
    2 NO
    Double-stage switching element
    2 NO in the 1st stage
    1 sequence-controlled NO in the 2nd stage
    Rated operating voltage [V] 230 400 500 230 400 500
    Rated operating current [A] 10 6 4.5 10 6 4.5
    Utilisation category to
    DIN VDE 0660 /
    EN 60947 Main current
    AC 15 AC 15
    Nominal insulation voltage Ui 500 V~ to DIN VDE 0110, CSA 150 V AC