Low deadweight, easy to position
KBK pillar and wall-mounted slewing jibs
Switch to improved productivity and ergonomics
Manually handling and combining or moving relatively light loads is often not only time-consuming, but also an ergonomic burden for employees. Together with a wide selection of hoist units, our slewing jibs and cranes installed direct at the workplace enable all types of workpieces to be lifted and transported quickly and easily and deposited gently and precisely. In this way, setting up and idle times can be significantly reduced and periods of waiting for workshop cranes to become available can be completely eliminated. Further strengths of our pillar and wall-mounted slewing jibs include:
- light and fast load handling
- ease of operation and high operating safety and reliability
- load capacities up to 10,000 kg.
- simple installation using fittings included in the system.
Your Contact
Demag Cranes & Components (Middle East) FZE
Head Office
PO Box 61351
Dubai, UAE
Product information
Pillar-mounted slewing jibs
Slewing range 270°/300°
KBK pillar-mounted slewing jibs
Pillar-mounted slewing jibs with jibs made of profile sections from the KBK light crane system feature high load capacities and a long outreach in relation to their deadweight. The low weight enables the jib to be moved easily and the use of KBK hollow section rail as the crane girder provides for very low travel forces.
| Load capacity [kg] |
Outreach [m] |
|||||
| 2 | 3 | 4 | 5 | 6 | 7 | |
| 80 | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x |
| 250 | x | x | x | x | x | x |
| 500 | x | x | x | x | x | |
| 1000 | x | x | x | x |
D-AS 270 pillar-mounted slewing jibs
The light-weight design and low-headroom jib make this pillar-mounted slewing jib suitable for universal applications in the medium load range up to 2,000 kg.
Low-headroom KBK pillar-mounted slewing jibs
The low-headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernisation measures or changes in the use of the building, our pillar-mounted slewing jibs with short jib sections are the perfect solution in many cases.
KBK pillar-mounted slewing cranes with two jibs
Effective solution as a pillar-mounted slewing crane with two jibs for the same space requirement as slewing cranes with one jib. Four different jib arrangements are available for the perfect workplace design. The efficiency of specific process sequences can be further improved.
| Load capacity [kg] |
Outreach [m] |
||||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| 80 | x | x | x | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x | x | x | x |
| 250 | x | x | x | x | x | x | x | x | x |
| 500 | x | x | x | x | x | x | x | ||
| 1000 | x | x | x | x | x | ||||
| 1600 | x | x | x | x | |||||
| 2000 | x | x | x |
Pillar-mounted slewing cranes
Slewing range n x 360°
Pillar-mounted slewing cranes offer a significant advantage wherever movement of the jib is not inhibited by walls, columns or similar obstacles The slewing range covers n x 360°.
D-GS 360 pillar-mounted slewing cranes
D-GS pillar-mounted slewing cranes for loads weighing up to 1,000 kg feature particularly low headroom and compact dimensions. They are the ideal solution wherever maximum hook paths are required for applications with low ceiling dimensions.
| Load capacity [kg] |
Outreach [m] |
|||||
| 2 | 3 | 4 | 5 | 6 | 7 | |
| 80 | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x |
| 250 | x | x | x | x | 6,5 | |
| 500 | x | x | x | |||
| 1000 | x | 3,5 |
D-TS 360 pillar-mounted slewing cranes
These slewing cranes are the universal solution for the medium load range up to 5,000 kg. The low-headroom jib provides for particularly long hook paths. The cranes can also be powered by an optional electric slewing drive for ease of operation.
| Load capacity [kg] |
Outreach [m] |
|||||
| 2 | 3 | 4 | 5 | 6 | 7 | |
| 80 | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x |
| 250 | x | x | x | x | x | x |
| 500 | x | x | x | x | x | x |
| 1000 | x | x | x | x | x | x |
| 1600 | x | x | x | x | x | x |
| 2000 | x | x | x | x | x | x |
| 2500 | x | x | x | x | x | x |
| 3200 | x | x | x | x | x | x |
| 4000 | x | x | x | x | x | x |
| 5000 | x | x | x | x | x | x |
D-MS 360 pillar-mounted slewing cranes
These pillar-mounted slewing cranes feature a high load capacity for a long outreach. The low-headroom jib also offers particularly long hook paths. Depending on requirements, D-MS cranes can be equipped with a DC chain hoist or a DR rope hoist. They can also be powered by an optional electric slewing drive for ease of operation.
| Load capacity [kg] |
Outreach [m] |
||||||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
| 80 | x | x | x | x | x | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x | x | x | x | x | x |
| 250 | x | x | x | x | x | x | x | x | x | x | x |
| 500 | x | x | x | x | x | x | x | x | x | x | x |
| 1000 | x | x | x | x | x | x | x | x | x | x | x |
| 1600 | x | x | x | x | x | x | x | x | x | x | x |
| 2000 | x | x | x | x | x | x | x | x | x | x | x |
| 2500 | x | x | x | x | x | x | x | x | x | x | x |
| 3200 | x | x | x | x | x | x | x | x | x | x | x |
| 4000 | x | x | x | x | x | x | x | x | x | 11,5 | |
| 5000 | x | x | x | x | x | x | x | x | |||
| 6300 | x | x | x | x | x | 7,5 | |||||
| 8000 | x | x | x | x | x | ||||||
| 10000 | x | x | x | x |
Wall-mounted slewing jibs
Slewing range 180°/360°
KBK wall-mounted slewing jibs
A decisive advantage of wall-mounted slewing jibs is that they require no floor space, since they are mounted on load-bearing concrete walls, pillars or machinery and installations. They are particularly easy to install, since the bracket is ready to be fitted as a unit and eliminates any complicated alignment work. KBK wall-mounted slewing jibs are suitable for the lower load range up to 1000 kg.
| Load capacity [kg] |
Outreach [m] |
|||||
| 2 | 3 | 4 | 5 | 6 | 7 | |
| 80 | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x |
| 250 | x | x | x | x | x | x |
| 500 | x | x | x | x | x | |
| 1000 | x | x | x | x |
Low-headroom KBK wall-mounted slewing jibs
The low headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernisation measures or changes in the use of the building, our "short" units are the perfect solution in many cases.
D-AW wall-mounted slewing jibs
D-AW wall-mounted slewing jibs are suitable for universal applications in the lower load range up to 2,000 kg. The low deadweight makes it easy to move the jib even under load. Thanks to their low headroom dimension, they can also be used wherever long hook paths are needed in spite of a low ceiling height.
| Load capacity [kg] |
Outreach [m] |
||||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| 80 | x | x | x | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x | x | x | x |
| 250 | x | x | x | x | x | x | x | x | x |
| 500 | x | x | x | x | x | x | x | ||
| 1000 | x | x | x | x | x | ||||
| 1600 | x | x | x | x | |||||
| 2000 | x | x | x |
D-GW wall-mounted slewing jib
Designed for use with Demag chain hoists or Demag rope hoists in connection with their low-headroom jib and high load capacity, D-GW wall-mounted slewing jibs are suitable for a wide variety of applications.
| Load capacity [kg] |
Outreach [m] |
||||||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
| 80 | x | x | x | x | x | x | x | x | x | x | x |
| 125 | x | x | x | x | x | x | x | x | x | x | x |
| 250 | x | x | x | x | x | x | x | x | x | x | x |
| 500 | x | x | x | x | x | x | x | x | x | x | x |
| 1000 | x | x | x | x | x | x | x | x | x | x | x |
| 1600 | x | x | x | x | x | x | x | x | x | x | x |
| 2000 | x | x | x | x | x | x | x | x | x | x | x |
| 2500 | x | x | x | x | x | x | x | x | x | x | |
| 3200 | x | x | x | x | x | x | x | x | 10.5 | ||
| 4000 | x | x | x | x | x | x | x | 9.5 | |||
| 5000 | x | x | x | x | x | x | 8.5 | ||||
| 6300 | x | x | x | x | x | ||||||
| 8000 | x | x | x | 5.5 | |||||||
| 10000 | x | x | x |
