Safeguarding You and Your Employees
Safeguarding you and your employees
Leave nothing to chance in occupational safety. As an owner of cranes and hoists, electrical installations and equipment, you are responsible for the protection of your staff. Our regular safety inspections improve the security of your equipment. They ensure that hazards, such as personal injury or damaged equipment caused by falling loads, are identified and can be prevented in good time – and that statutory accident prevention regulations are satisfied.
Service for any brand
Regardless of whether you operate Demag equipment or products made by other manufacturers – we aim to ensure fully safe operation. Our highly qualified service specialists are authorised to carry out safety inspections on all types of equipment.
All inspections from a single source
We organise and carry out all of your required lifting equipment safety inspections – with state-of-the-art expertise and a wealth of experience, helping you to meet your legal obligations as an owner and operator of industrial equipment.
- Improved occupational safety
- Protection against possible claims for damages
- Avoidance of consequential damages and high repair costs
- Reduction of unnecessary downtimes caused by malfunctions
- Compliance with legal requirements
- Complete documentation of the results
Safety inspections of crane installations, winches and hoist
Regular safety inspections are not only essential for the safety of your plant and equipment – they also extend product service life as damage and wear can be detected and rectified in good time.
On your behalf, we carry out the regular visual inspections and function checks as required by relevant regulations. At the same time, we check whether your plant and equipment is in a safe operating condition at the time of the inspection.
Scope of services
- Examination of equipment for compliance with the data in the test and inspection booklet
- Examination of the condition of components and equipment regarding damage, wear, corrosion or any other changes
- Examination of the hoist unit to calculate the elapsed share of its theoretical duration of service (safe working period (SWP) check)
- Examination of safety devices and brakes to ensure they are complete and effective
- Operating function and brake test with a load for the maximum permissible load capacity
- Examination of name plates and signs to ensure they are complete
- Documentation of test results
- Safety assessment for commissioning or further operation
- Decision on follow-up inspection
- Application of inspection sticker
- Completion summary meeting
Safety inspection of load handling attachment and lifting accessories
Although they are in constant use, load handling attachments and lifting accessories are frequently taken for granted. However, minor or even invisible damage can have a considerable impact on safety. For this reason, this equipment must be in perfect working condition at all times – and regular inspections are essential.
Documented safety and reliability
Our inspection technicians compile a record of your load handling attachments and slings and document the inspection process and any results. When the inspection has been completed, you receive official acknowledgement in the form of inspection tags and an inspection report that your load handling attachments and slings meet the relevant legal requirements. Any defects are either repaired direct on site or at our Demag Repair Centre.
The benefits at a glance
- State-of-the-art testing technology, experience and expertise right on your site
- Maximum safety, reliability and availability of your equipment
- Test frames for testing the operating functions of mechanical lifting equipment and magnets
- Magnetic fracture testing equipment to detect small cracks
Risk assessment is the key to reducing industrial accidents, occupational disease and work-related illness. It is also decisive for greater efficiency and increased competitiveness. Benefit from our wealth of experience with all types of cranes and hoists for the necessary assessment of risks relating to all aspects or work performed by crane operators and riggers.
We can compile risk assessments for the owners of crane installations to assess working conditions as specified in relevant regulations. Our many years of experience and our constantly growing database enable our experts to make a reliable assessment on the basis of the relevant risk specifications.
It is a legal requirement for employers to plan and implement all occupational safety measures necessary to safeguard the health of their employees.
The risk assessment serves to define risks in working areas or at specific workplaces and forms the basis for measures that have to be taken by the owner of an installation. The risk assessment aims to help eliminate causes at their source or to reduce risks by means of technical or organisational measures or by the employees’ personal conduct.
Scope of services
- Initial assessments
- Assessments following malfunctions or major changes
- Assessments at regular intervals
- Demarcation of areas of activity
- Discussions with supervisors and equipment operators
- Identification and assessment of risks
- Identification of required measures
- Documentation of the risk assessment
SWP calculation for hoists
Our SWP calculation provides you with reliable information on the remaining service life of your chain and rope hoists. We calculate the loads lifted by your hoist and the elapsed share of its theoretical duration of service, which enables us to guarantee the remaining safe working period (SWP). These checks can be carried out for any chain or rope hoist brand, since we have extensive experience of all products.
Safe and reliable load handling is of prime importance in materials handling installations. Ageing and wear, however, can easily result in hazards, which may become highly dangerous if they are not addressed in good time.
- Reliable and up-to-date information about the remaining duration of service
- Early detection of hazards caused by material fatigue
- Efficient planning of measures
- Early notification of any required general overhaul or replacement
Scope of services
- Recording of the necessary data
- Calculation of the elapsed share of the theoretical duration of service with special software
- Documentation of results
- Advice on measures to be implemented
Safety inspection of electrical equipment
We reliably test the integrity of your electrical equipment. In a meeting with you, we will discuss any measures that may be necessary to maintain or restore the safety and reliability of your electrical equipment according to relevant accident prevention regulations and codes of practice. In this way, we help you to ensure compliance with all safety regulations.
Employers are obliged to ensure that electrical equipment is in good operating condition before it is put into service and at regular intervals. Electrical equipment as defined by relevant accident prevention regulations includes all equipment that can be used as a whole or as individual parts for the application of electric power or for the transfer, distribution and processing of information. Furthermore, it also includes plant and installations that are created by combining electric equipment. They are considered to be safe if there is no direct or indirect danger of personal injury if they are correctly operated and used as intended. Their "safe condition" also includes any protection required against external factors.
Recommended regular inspections
Inspection intervals must be selected to ensure that any defects that occur can be detected in good time. Property insurers and Demag recommend regular inspections for cranes. The inspection must be carried out by a qualified electrician in accordance with all relevant electrical regulations. Occupational accident insurance organisations also require tests and inspections to be recorded with entries specifying when inspections are carried out.
Scope of services
- Initial meeting with the person responsible for the installation
- Visual inspection for any external defects
- Fucntion check including all safety and signal equipment
- Check of electrical connections
- Check of protective measures
- Check of insulation resistance
- Earth-loop impedance measurement
- Written documentation of the results
- Completion summary meeting
Service Contact UK
Unit 1 Charter Point, Coalfield Way, Ashby Business Park,
Ashby De La Zouch, LE65 1NF,