Demag Cranes offers KBK pillar-mounted slewing jibs with one or two jibs, as well as pillar-mounted slewing jibs. With a 270°/300° slewing range, pillar-mounted slewing jibs further improve productivity and ergonomics. 

KBK Pillar-Mounted Slewing Jibs

KBK pillar-mounted slewing jib cranes feature high load capacities and a long outreach relative to their deadweight. The low weight enables the jib to move easily while the use of KBK hollow section rail as the crane girder ensures very low travel forces.

D-AS 270 Pillar-Mounted Slewing Jibs

The light-weight design and low-headroom jib make this pillar-mounted slewing jib suitable for universal applications in the medium load range up to 1T.

KBK Pillar-Mounted Slewing Cranes with Two Jibs

KBK pillar-mounted slewing cranes with two jibs are an effective solution under a  space requirement. With four different jib arrangements available, these slewing jib cranes are the perfect workplace design. Additionally, the efficiency of specific process sequences can be further improved.

With up to a 360° slewing range, pillar-mounted slewing cranes offer a significant advantage when movement of the jib is not inhibited by walls, columns or similar obstacles. Demag Cranes has a complete offering of pillar-mounted slewing cranes. 

D-GS 360 Pillar-Mounted Slewing Cranes

D-GS pillar-mounted slewing cranes feature particularly low headroom and compact dimensions, making them ideal for loads weighing up to 1T. These jib cranes are the ideal solution in situations when maximum hook paths are required for applications with low ceiling dimensions.

D-TS 360 Pillar-Mounted Slewing Cranes

These slewing cranes are the universal solution for a medium load range, up to 2.5 T, and for low-headroom jib cranes with particularly long hook paths. These cranes can also be powered by an optional electric slewing drive for ease of operation.

D-MS 360 Pillar-Mounted Slewing Cranes

These pillar-mounted slewing cranes feature a high load capacity for a long outreach with low headroom. Depending on requirements, D-MS cranes can be equipped with a DC chain hoist or a DR rope hoist. They can also be powered by an optional electric slewing drive for ease of operation.

KBK, D-AW, and D-GW wall-mounted slewing jibs from Demag Cranes have a 180°/360° slewing range and increase workplace productivity. 

KBK Wall-Mounted Slewing Jibs

Since they can be mounted on load-bearing concrete walls, pillars or machinery, a major advantage of wall-mounted slewing jibs is that they require no floor space. They are easy to install and come with a ready-to-be-fitted bracket eliminating complicated alignment work. KBK wall-mounted slewing jibs are suitable for the lower load range up to 1T.

D-AW Wall-Mounted Slewing Jibs

D-AW wall-mounted slewing jibs are suitable for universal applications in the lower load range up to 2T. Low deadweight makes it easy to move the jib even under heavy loads. Thanks to their low headroom configuration, they can also be used wherever long hook paths are needed.

D-GW Wall-Mounted Slewing Jib

Designed to be paired with Demag chain hoists or Demag rope hoists in connection with their low-headroom jib and high load capacity, D-GW wall-mounted slewing jibs are suitable for a wide variety of applications.