Installation transparency thanks to integrated display DSE control pendants Safely control simply everything DSE-10 control pendant for ergonomically controlling hoists and machinery. These wire-connected units are used for controlling DC chain hoists and DR rope hoists in applications with up to three motion achses. To serve these needs, we supply DSE-10 control pendants for two different control technologies: DSE-10C/CS: control pendants to control DC chain hoists, travelling hoists and cranes with an innovative 'triState' interface available with 2-stage pushbuttons (C) or with variable pushbuttons (type CS) DSE-10R: control pendants with a CAN bus interface prepared for the safe control of DMR rope hoists, travelling hoists and especially DMR cranes that are fitted with CAN bus-based safety control. Both types offer outstanding features, such as: particularly ergonomic control pendant design for safe and fatigue-free operation housing that is highly resistant to impacts comprehensive accessories for operation in harsh environments and for protection against fluids and aggressive media. Your Contact Demag Cranes & Components GmbH Postfach 67 58286 Wetter Germany Phone: +49 (0) 2335 92-0 Fax: +49 (0) 2335 92-7676 Email: [email protected] Contact Product information The benefits at a glance Operators can work in a natural, comfortable posture Easy, fatigue-free operation thanks to the favourable ergonomic design Highly impact-resistant housing made of high-quality thermoplastic Additional improved resistance to impacts thanks to an elastic cover (bumper) Optional silicone sleeve for protection against abrasive substances and aggressive chemicals High functional reliability thanks to non-flammable, climate and corrosion-proof housing Housing material resistant to fuels, salt water, grease, oils and lyes Various cable types available Support sleeve with bayonet connection and cable collector for variable adjustment of the cable length Alternatively: 2TY cable with vulcanised strain relief cords 2-stage pushbuttons or variable pushbuttons for particularly smooth control of variable-speed drive solutions Technical data DSE-10C/CS control pendant No internal wiring is required in the pendant housing thanks to the PCB, which has a central connection (plug connection) The housing is made of high-quality thermoplastic which is highly resistant to impacts Protective insulation to VDE 0100 part 410, section 6.2 Switching distances and forces to DIN 33 401, holding force < 8 N IP 65 enclosure to DIN VDE 0470 T.1 and EN 60 529 as standard The housing is non-flammable, climate and corrosion-proof Resistant to fuels, salt water, grease, oils and alkaline solutions Optional accessory: close-fitting silicone sheath to protect against moisture and abrasive materials Complete DSE-10C/CS control pendants with part numbers are provided with pre-defined symbols Symbols: self-adhesive labels that are resistant to abrasion. Arrow symbols correspond to FEM and ISO 15012 DSE-10R control pendant To control DR rope hoists via CAN bus interface Housing characteristics and design as for DSE-10C/CS DSE-10R variants fitted with 2-stage pushbuttons or variable pushbuttons for precisely controlling inverter-fed drives Infrared interface for service work Integrated display to show operating and service data, e.g. Load display incl. load-proportional bar display Load reduction display Dsplay of switching statuses of universal outputs Crab/crane selection display Service interval Safety function Additional comprehensive information menu (e.g. remaining service life, basic hoist data, error memory) Application examples DSE control pendants DSE control pendants DSE control pendants Application examples DSE control pendants DSE control pendants DSE control pendants DSE control pendant with impact protection to a crane – tried and tested solution. Related products DRC MJ mini joystick You can control your cranes safely and precisely with the Demag DRC MJ hand-held transmitter, while concentrating fully on the handling task. DRC-MP radio control system Convenient control by joystick or hand-held transmitter DST control pendants Versatile controls with a panel
DSE control pendants DSE control pendant with impact protection to a crane – tried and tested solution.
DRC MJ mini joystick You can control your cranes safely and precisely with the Demag DRC MJ hand-held transmitter, while concentrating fully on the handling task.