DRC MJ mini joystick Ergonomic. Efficient. Intuitive. Ergonomics @ Intuition You can control your cranes safely and precisely with the Demag DRC MJ hand-held transmitter, while concentrating fully on the handling task. By controlling your crane with two joysticks, you can intuitively and easily move it on three levels – and always keep the load safely in sight at the same time. This transmitter is ideally suited for intuitive control with just one hand, since you can precisely control combined crane and crab motions with one thumb. The compact transmitter design ensures fatigue-free control, even after several hours of operation. Your Contact Demag Cranes & Components GmbH Postfach 67 58286 Wetter Germany Phone: +49 (0) 2335 92-0 Fax: +49 (0) 2335 92-7676 Email: [email protected] Contact The benefits at a glance Ergonomics @ Function Visible Bright, high-contrast display to show operating statuses, load information and charge level, etc. Two-colour display: neutral and red Precise For long/cross travel: Mechanical latch at slow speed (V1) For individual needs Individually programmable electronic gate Tangible Man/machine interface: active warning given by the transmitter with a vibration alarm that you can feel, e.g. if an overload occurs Ergonomic Joysticks for intuitive single-handed control (right/left) Top: lift/lower Bottom: long and cross travel also for diagonal motions Safe Ribs prevent accidental actuation Shaped Ergonomic shape for fatigue-free operation Rugged Tough housing made of polyamide with a smooth, scratch-resistant surface Impact-resistant thanks to rubber caps Battery charge @ Productivity Our ergonomic DRC MJ hand-held transmitter is part of the Demag D3 generation of radio equipment, offering all the benefits of these state-of-the-art radio systems. Endurance Optimised power management: Hardware design with low-energy chipsets HF transmission for low power consumption NiMH battery technology The result: 2.5 hours of charging for 5 days of continuous operation Safety D3 systems satisfy the requirements of the DIN EN 13849-1 machine safety standard Category 3, PL d Speed limit Even more precise control thanks to scalable reduction of travel and lifting speeds Can be programmed to 30, 50 or 70% of the maximum speed Transmitter transfer Transmitter transfer at the press of a button – without interrupting the operating sequence Coexistence Up to 40 D3 radio systems can be operated in parallel in proximity to each other D3 transmitters and receivers satisfy the DIN EN 300328 coexistence standard Technical data Programmable function keys Crab selection Tare Assistance functions 2 buttons Signal button (also for limit switch check) Stop function DRC MJ hand-held transmitter Dimensions (L x W x H): 192 x 75 x 66 mm LCD, 2 colours, illuminated, 35 x 25 mm Typical range of approx. 100 m 2.4 GHz ISM band frequency range IP 55 enclosure Weight (with/without battery): 450 g/395 g Approx. 5 days of operation with one charge Downloads Brochures DRC MJ mini joystick Related products DRC-J and DRC-JT radio control system With the DRC-J and DRC-JT(S) radio control systems, crane control is safe and convenient. DSE control pendants Ergonomic design combined with efficient functions DRC-MP radio control system Convenient control by joystick or hand-held transmitter
DRC-J and DRC-JT radio control system With the DRC-J and DRC-JT(S) radio control systems, crane control is safe and convenient.