Automated crane-served store with magnet lifting equipment Becker Stahl-Service Process solution for handling steel Ordered in the morning, produced in the afternoon, loaded in the evening and shipped the next morning – deliveries of slit strip and material cut to order within 24 hours are just part of the normal daily routine for one of the largest European service centres for flat steel products. To achieve this, Becker Stahl-Service GmbH has invested in innovative production and storage equipment. The automated crane-served store for steel coils is a key element of the new production facility, where two Demag process cranes ensure that material is stored appropriately and staged in time for the production lines. The hardware and the warehouse management computer (WMC) is supplied by Demag Cranes & Components from a single source. Two automated process cranes with magnet lifting equipment Increase in the effective utilisation of the store by 30 per cent Warehouse management system with configurable storage strategies Crane controls to meet safety requirements Becker Stahl-Service From trader to steel service centre With more than 6,000 loading and unloading operations per month and shipping in four shifts, six days per week, Becker Stahl-Service in Bönen, Germany, provides just-in-time deliveries to satisfy its customers' wishes. Established as a steel trader, the company, which is based in Unna-Bönen, has grown to become a steel service centre that has more than 400 employees and which sells, stores, handles and processes steel. The range of products includes wide band, slit strip, plates, blanks and trapezoid blanks in many finishes and coats. With more than 60 per cent of its products manufactured for customers in the automotive and automotive supply industry, the supplier has to meet the highly demanding quality and production standards of this sector. An annual sales volume of some 1 million tonnes combined with stocks of approx. 200,000 tonnes and short production lead times has made the supplier a leader in the European steel trade sector. The company has been part of the Klöckner Group since 2010. Nord facility project Increased storage capacity thanks to magnet lifting equipment The cranes operating in the store at Becker Stahl-Service are a major component of the in-house logistics system, which link the production, storage and shipping operations with each other. They have a large impact on the efficiency and the flexibility of the entire processes. The maximum possible availability of the cranes has the highest priority. Two Demag Coilmaster process cranes are responsible for the semi- and fully automated handling of the steel coils at Becker. Reliable operation, is therefore, also ensured by the secondary crane system. Crane 1 serves the coil store in fully automated mode. Crane 2 operates under semi-automated control and is used for loading and unloading the incoming trucks as well as for serving the front zone of the store (quarantine zone). This crane can also operate in automatic mode. The load handling attachment is innovative: Demag process cranes are being used with coil magnets for the first time in a coil store: Optimum utilisation of the available space: since the loads are picked up from above, the steel coils are stored with a gap of only 300 mm between them. This increases the effective utilisation of the store by some 30 per cent. Gentle handling of the load: the magnet system ensures that the heavy, but also fragile, steel coils are handled carefully. Strategies can be configured to achieve the best possible placement of the relevant coils in the store – also in three-level stacks. High level of safety: in addition to the laser-controlled crane and crab positioning system, light barriers, which operate with two-stage cut-off, also ensure that the cranes maintain a safe distance from each other. The crane anti-collision system is monitored by a safety control system, which is specified to Category 3. Optimum efficiency: the store operates 24/7 without interruption with the highest possible efficiency. The required handling rates are achieved with the Demag warehouse management system, which is integrated into the host system infrastructure at Becker Stahl-Service. Kind to resources: in addition to optimum utilisation of the available space, the crane systems also perform well in terms of power consumption. The energy recovered when loads are lowered is fed back into the in-house power supply system, which helps to reduce power consumption and the operating costs of the installation. Process steps Before the coils enter the store The material is delivered to and shipped by truck at the Becker Nord facility. The goods are lifted off the trucks and deposited in the quarantine zone by the Coilmaster crane under manual control. In this area, the goods are registered, i.e. labelled and issued with a coil record document . The coil data are transferred to the warehouse management system and the ERP system (Baan), where the data are compared with the specifications saved in the system. A sample of every coil is cut for quality assurance. The data available at Becker goes all the way back to the steel supplier, which enables all physical and chemical coil data to be accessed. Safe and reliable pick-up of the coils After the quality assurance check has been completed, the coil is transported by crane under manual control to the transfer point for automatic handling. When the magnet engages the load, a laser beam checks to ensure that the coil is positioned in the centre of the magnet. If necessary, a correction is made in the cross-travel direction. This ensures that the load is precisely picked up and positioned by the automatic crane in the store. The magnet operates with two levels of safety: in the first stage, the load is magnetised and raised at creep speed. When the magnet is safely engaged, the system automatically switches over to full load mode and the load is raised at maximum lifting speed. Transfer to the automatic crane At the transfer point, the operator switches the crane over to automatic mode. The warehouse management computer (WMC) assigns a location within the fenced-off storage area in front of the automatic zone. After the coil has been handed over, the crane returns to the quarantine zone, where it waits for the next unloading operation. The WMS assigns a storage mission to Automatic crane 1 with details of the source and destination co-ordinates. Using laser sensors, the crane positions its hoist precisely above the coil and picks it up, while the crane weighing device measures the exact weight of the coil. The hoist unit raises the magnet and load to the highest hook position, where they engage a mechanical guide to prevent any load sway. The automatic crane then travels to the pre-defined storage position at maximum speed and transfers the coil to the store. Store structure The store was designed according to geometric conditions. The widest coils are stored in the outer lines to utilise the crane approach dimension at the edge of the store. The warehouse management computer is aware of the dimensions, surface finish and grade of the materials. This enables the system to store the items appropriately. The coils rest on so-called coil blocks, which reflect the different widths and diameters. Storage strategies that allow for the various types of material, including multi-stage restrictions for stacking items, for example, ensure maximum utilisation of the available space as well as safe and reliable treatment of the material. Retrieval processes Items are retrieved as required in production or to customer order according to a coil staging list. Items are transferred to production via cross-shaped turntables, which represent the interface between the store and the machines. The process crane deposits the coils and reports completion of transfer to the machine tools via a „handshake“ procedure. Partly used coils are also returned to the automated zone together with a data module via the turntable. To do this, the crane determines the current weight of the coil by means of an integrated weighing device. Production and finished goods store Becker Stahl-Service has installed cut-to-length and slitting lines in bays 12 and 13, which are located immediately next to the store. Four manually operated Demag ZKKE double-girder overhead travelling cranes, which are equipped with radio controls, are used for handling the products in these production bays. Bay 13 is equipped with a 35-tonne crane and a 28-tonne crane. Both of these cranes work with C-hooks for handling slit strip. Two 20-tonne cranes equipped with DR-Pro rope hoists and grabs for handling palletised goods operate in neighbouring bay 12, where sheet metal measuring up to 4 millimetres thick is processed. Technical data Cranes for coil storage and processing Crane type*) Load capacity [t] Span [mm] Load handling attachment Control Automated coil store in bay 11 ZKKW 34 39,000 Coil magnet Automatic ZKKW 34 39,000 Coil magnet Radio control/automatic Bay 12 (slitting lines) ZKKE 20 31,810 Palletised-load grab Radio control ZKKE 20 31,810 Palletised-load grab Radio control Bay 13 (cut-to-length lines) ZKKE 35 31,810 C-hook Radio control ZKKE 28 31,810 C-hook Radio control *) ZKKW: Process crane with winch unit ZKKE: Double-girder standard overhead travelling crane Image gallery Becker Stahl-Service Becker Stahl-Service Becker Stahl-Service More Becker Stahl-Service Image gallery Becker Stahl-Service Safe and gentle handling of steel coils with magnet lifting equipment. Becker Stahl-Service Optimum space utilisation: the magnet system enables loads to be picked up from above – the steel coils can be stored with a gap of only 300 mm between them. Becker Stahl-Service The space-saving arrangement of the steel coils enables the storage volume to be increased by 30 per cent. Becker Stahl-Service Crane under manual control in the goods-in area; the coils are transferred to the automatic store after they have been registered. Becker Stahl-Service The steel coils are precisely picked up and handled safely and gently in the automatic store Becker Stahl-Service Trucks are unloaded in the delivery zone Becker Stahl-Service Two automated cranes provide for fast handling rates in the coil store Becker Stahl-Service Four double-girder overhead travelling cranes equipped with C-hooks in machining shops 12 and 13. Becker Stahl-Service Coils being loaded after the machining operation. Becker Stahl-Service Production layout Related products and services Process cranes for steel handling Process cranes for precisely handling coils, sheet and plate metal and long material Process cranes for process integration Crane installations specially designed for mechanical engineering and automotive industry applications Spare parts Genuine parts for unsurpassed reliability and long service life.