Perfect handling of loads weighing up to 250 kg

DCM-Pro Manulift

Convenient operation and load handling with one hand

The DCM-Pro Manulift was developed for handling loads quickly and safely with only one hand. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit which is rigidly connected to the load handling attachment, the operator only needs one hand to operate the hoist and guide the load. Further strengths:

  • convenient operation and load guidance with one hand
  • for all Manulift load handling attachments or specially developed load handling attachments
  • simple replacement thanks to quick-change coupling
  • suitable for right-hand and left-hand operation

DemagcranesTV

Your Contact

Konecranes (Singapore) Pte Ltd

33 Gul Circle, Singapore 629570
Service Hotline : +65 6862 1123
WhatsApp : +65 9430 8365

Phone:
+65 6305 3500
Fax:
+65 6862 1933

Product information

The benefits at a glance

Versatile performance

  • Two hoist speeds as standard
  • Versatile adaptability to any task
  • Simple exchange of the load handling device thanks to quick-change coupling
  • For right-hand and left-hand operation

High operating quality

  • Convenient single-handed handling and guidance of loads weighing up to 250 kg
  • Quick-change coupling for a variety of load handling attachments (load hooks, pantograph tongs, clamping and shaft grippers, parallel gripper systems, specifically developed load handling attachments)
  • Service-friendly thanks to diagnostics interface

High safety and reliability

  • 24 V contactor control
  • FEM classification from 2m+ to 4m
  • Slipping clutch with speed monitoring
  • No brake adjustment
  • No load dropping thanks to slipping clutch arranged in front of the brake
  • Operating limit switches

Long service life

  • Gearbox, brake and slipping clutch maintenance-free for up to 10 years
  • Aluminum motor, gearbox and electrical cover parts provided with UV-resistant powder coating
  • Robust cylindrical-rotor motor with fan and separate DC brake beneath the electrical cover

Selection table

Demag DCM-Pro Manulift selection table

LC
[kg]

Manulift

DCM-Pro

Lifting speed
[m/min]
Hook path
[m]
FEM Reev-
ing
Weight [kg]
for
hook path
50
Hz
60
Hz
2.8 m 4.3 m
80 1 8 / 2 9.6 / 2.4

2.8

and

4.3


 

4m 1/1 22 24
2 16 / 4 19.2/4.8 4m 22 24
5 24 / 6 28.8/7.2 4m 28 30
125 1 8 / 2 9.6 / 2.4 4m 22 24
2 16 / 4 19.2/4.8 4m 22 24
5 24 / 6 28.8/7.2 4m 28 30
200 2 8 / 2 9.6 / 2.4 3m 22 24
200
250
5 16 / 4 19.2/4.8 4m 28 30
250 2 8 / 2 9.6 / 2.4 2m+ 1) 22 24

  
1) 2m+ corresponds to 1,900 hours at full load

Customer benefits at glance

Safety

Safety

  • Low-voltage control pendant thanks to 24 V contactor control system
  • Safety-related functions satisfy at least Performance Level c and Category 2 to EN ISO 13849-1
Minimum load sway

Minimum load sway

  • Smooth cross-travel starting and braking motions for low-sway load handling
  • Speeds and acceleration/braking rates can be modified by means of the control pendant, if required
Long service life

Long service life

  • Generously specified gearbox. 2m+ (1,900 hours) for main load capacities and up to 4m (6,300 hours) for demanding applications
  • All sub-assemblies of the chain hoist are rated for a long service life, even under the most demanding conditions
Temperature range

Temperature range

  • Reliable operation from -20 °C to +45 °C without any reduction in the duty factor
  • Operation also possible up to 60 °C and more
Ergonomics

Ergonomics

  • Length of control cable or position of control pendant can be adjusted without the need for any wiring
  • Length of control cable that is not needed can be stored under the service cover
High performance monitor

High-performance motor

  • Hoist motor has large safety reserves to provide for reliable operation for many years
  • Can be used for switching cycles way beyond usual market levels
Pro Hub function

Pro-Hub function

  • Up to 90% higher rated lifting speed in reduced load range
Easy to service

Easy to service

  • Gearbox & slipping clutch maintenance-free for up to 10 years
  • Brake maintenance-free for up to 10 years (up to 5 years for DC 10–25)
  • Simple and rapid maintenance and repair of individual components thanks to the modular chain hoist design – cuts any downtime to a minimum
Variable speeds

Variable speeds

  • Valuable and sensitive parts can be moved and positioned more smoothly and reliably
  • Variable button characteristic like a car accelerator pedal
Status display

Status display

  • Display for elapsed operating time counter and operating statuses
  • Always up-to-date for service purposes
Slipping clutch monitoring

Slipping clutch monitoring

  • Harmful continuous slipping eliminated thanks to speed monitoring
  • Reliable protection against extreme overload
  • Load securely held in any operating situation and cannot drop while hoist is at standstill, since brake is arranged in front of the slipping clutch in load-bearing arrangement
Low noise level

Low noise level

  • Reduced operating noise thanks to helical gearing in all gearbox stages
  • Smooth running characteristics thanks to high-quality gearing
Online product configurator

Online product configurator

  • Easy to use
  • Specify products to meet your needs
  • Save your configuration
  • Immediate results
  • Online ordering via Demag Shop
CAD geometry data

CAD geometry data

  • Configure 2D or 3D geometry data online in many file formats
  • 3D PDF for rapid view without CAD program
Information avaible 24/7

Information available 24/7

  • Whenever you want
  • Up-to-date information
Documentation

Documentation

  • Product description
  • Technical data
  • Circuit diagrams
  • Documents

Downloads