Back
Switch to German

1 2 3 4 5 6 7 8

/ 08

  • Wheel systems

    Solutions ready for connection for standardised and customized applications

    • DWS wheel set
      • Up to 60 t load capacity per wheel
      • For hollow profile sections, box-section girders and corner-bearing arrangements
    • RS wheel block system
      • For 3.5 to 18 t load capacity per wheel
      • Also for high temperature applications
    • LRS travel wheel system
      • Load capacity up to 6.5 t per wheel
      • For speeds up to 240 m/min
      • With spheroidal-graphite cast iron travel wheel or Hydropur tyre
    • DRS and DRS-M wheel block system
      • 8 sizes: 2.75 to 40 t load capacity per wheel
      • Wide variety of travel wheel designs

  • Travel wheels

    Standard variants (DRS and DRS-M)

    • A:  Guided on both sides by flanges for rail systems
    • B:  Wheels without any flanges, optionally fitted with lateral guide rollers, also with concave shape or contour to customer specifications
    • D:  Wheels guided by a flange on one side for units running at ground level
    • E:  Larger diameter wheels without a flange for increased ground clearance
    • S:  Wheels of prismatic, trapezoidal or concave shape for guided applications
    • F:  Flangeless travel wheels with Hydropur tyres for high acceleration & smooth operation
    • C: Flangeless, concave polyamide wheels for quiet operation that is kind to the runway

  • Complete travel units

    From components to complete systems

    • Solutions to meet specific requirements based on standardised sub-assemblies
    • Compact ground-level travel units with large ground clearance:
      • Central drive with dedicated drive shafts
      • Individual drives with central control unit
    • Torque brackets: Transfer of drive torque to the wheel system virtually without radial force

  • Motors

    For a wide variety of industrial drive tasks. Reliable and effective.

    • Conical-rotor brake motors (up to 55 kW) for stopping-and-starting drives or for direct line-fed travel applications,
    • Highly efficient Z cylindrical-rotor motors – also as brake motors and in continuous duty
    • Can be combined with system gearboxes:
      • Space-saving offset gearboxes
      • Compact angular gearboxes
      • Rugged helical gearboxes
      • FG microspeed drives:  Large mechanical speed ratios up to 500:1 between main and positioning speeds

  • Battery unit

    Autonomous solutions for transfer carriages

    • Charging and power unit integrated on board
    • Rail-mounted transfer carriage applications:
    • Transfer over gaps at crossings
    • Inside and outside areas without obstacle-free power supply
    • Paint booths and areas without electric power
    • Long travel paths – without additional power-supply lines

  • Application modules

    Solutions without the need for additional engineering

    • Dedrive Compact STO inverters with pre-programmed modules
    • Solutions ready for connection for specific applications
    • Complete unit in compact switchgear cabinet

  • Inverters

    Smart solutions for all drive requirements

    • Dedrive Pro 880 inverter
      • 9 sizes: 0.55 to 560 kW for power supplies from 380 to 690 V.
      • Implemented software package for crane control
    • Direct torque control
    • Master/follow applications
    • Load-sway reduction
    • Mechanical brake monitoring
    • Synchronised control of up to 4 hoists
    • Efficient use of energy
    • Dedrive Compact STO inverter
    • 6 sizes:  Motor shaft output from 0.75 to 110 kW.
    • Stopping-and-starting applications and operating processes for standard AC motors

  • SCU safety control unit

    Optimised for travel and lifting applications

    • For single and multiple axis control
    • Position measurement and monitoring in up to three dimensions
    • For safety-relevant monitoring of drive axis motions up to PL e to EN ISO 13849, and SIL 3 to EN 61508.
    • SafePMT parameter programming software to customize functions of travel and hoist drives