| Industry solutions |
Automatic processes
Fully automatic KBK III double-girder crane installation, travelling on three runways, as a loading machine with 700 kg load capacity. Gripper for picking up 4 m long guide sections.
All motions are frequency-controlled, destination travel is computer-assisted. Approach accuracy for lifting/lowering ± 3 mm, long/cross travel ± 2-5 mm.
Automatic processes for storage. Together with a control computer which plans and implements the logistics processes in the warehouse, the crane replaces the worker in the warehouse. The control computer together with the crane stacks the coils for delivery.
Using standardised assemblies, cranes can be built for complex requirements, e.g. lowered crab with four rope lead-offs and separate monorail track from the KBK crane construction kit and a Demag standard crane.
Semi-automatic KBK-III circuit for transporting engines. The engines are picked up in manual mode and then transported to the assembly line with automatic travel to the destination. The trolleys are fitted with two hoist units for tilting the engines as required for assembly.
When the order changes, the moulds are taken out of the injection moulding machine using an automatic grab and deposited in the mould storage zone. In the second process, the machine is fitted with the new mould that has been staged and prepared. The crane operating processes are constantly monitored in order to protect the operators.
Automatic loading of bundled scrap in rail wagons in a car production plant. The crane stacks the bundled scrap safely and precisely in blocks in the wagons using magnet grabs. Precise guiding of the load is ensured by the telescopic lifting mast.
Bridge crane in semi-automatic operation for handling refuse containers.
