Pillar and wall-mounted slewing jibs |
Workplace cranes for loads up to 10000 kg
Demag slewing jibs and cranes are a cost-saving addition to integrated handling systems. In some cases, this handling equipment is often the most economical solution. This applies to storage yards, on loading ramps or in buildings where other equipment cannot be installed due to structural limitations.
You benefit from Demag pillar and wall-mounted slewing jib cranes
- Improved ease of operation
- Maximum operating safety
- Easy assembly
- Delivery including complete electrical equipment
- Lockable mains connection switch
D-MOS mobile pillar-mounted slewing crane (up to 500 kg)
Ideally suited for workplaces that are subject to frequent change, since the crane is easily adapted to new requirements, or can be simply relocated together with the workplace. The location of the crane can be ideally adapted to the process requirements of the given application. D-MOS cranes are also highly suitable for maintenance or conversion work.
KBK pillar-mounted slewing jib crane (up to 1000 kg)
KBK slewing cranes feature high load capacities and outreach in relation to their deadweight. The low weight enables the jib to be moved easily and the use of KBK hollow section rail as the crane girder provides for very low travel forces.
KBK pillar-mounted slewing jib cranes are also available in low-headroom design
The low headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernisation measures or changes in the use of the building, our "short" units are the perfect solution in many cases.
KBK pillar-mounted slewing crane with two jibs (up to 1000 kg)
Effective solution as a pillar-mounted slewing crane with two jibs for the same space requirement as slewing cranes with one jib. Four different jib arrangements are available for the perfect workplace design. The efficiency of specific process sequences can be improved and, at the same time, implemented economically.
D-AS pillar-mounted slewing jib crane (up to 2000 kg)
The light-weight design and low-headroom jib make this pillar-mounted slewing jib crane suitable for universal applications in the medium load range up to 2000 kg.
D-GS pillar-mounted slewing crane (up to 1000 kg)
Pillar-mounted slewing cranes offer a significant advantage wherever movement of the jib is not inhibited by walls, columns or similar obstacles: the slewing range covers n x 360°. D-GS pillar-mounted slewing cranes for loads weighing up to 1000 kg feature particularly low headroom and compact dimensions. They are ideally suited wherever maximum hook paths are required and only limited headrom is available.
D-TS pillar-mounted slewing crane (up to 5000 kg)
This slewing crane is the universal solution for the medium load range up to 5000 kg. The low-headroom jib provides for particularly long hook paths. It can also be powered by an optional electric slewing drive for ease of operation.
D-MS pillar-mounted slewing crane (up to 10000 kg)
This pillar-mounted slewing crane features a high load capacity for a long outreach. The low-headroom jib provides for particularly long hook paths. It can also be powered by an optional electric slewing drive for ease of operation.
KBK wall-mounted slewing jib (up to 1000 kg)
The decisive advantage of wall-mounted slewing jibs is that they require no floor space, since they are mounted on load-bearing concrete walls, pillars or machinery and installations. They are particularly easy to install, since the bracket is ready to be fitted as a unit and eliminates any complicated alignment work. KBK wall-mounted slewing jibs are suitable for the lower load range up to 1000 kg.
KBK wall-mounted slewing jibs are also available in low-headroom design
The low headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernisation measures or changes in the use of the building, our "short" units are the perfect solution in many cases.
D-AW wall-mounted slewing jib (up to 2000 kg)
D-AW wall-mounted slewing jibs are suitable for universal applications in the lower load range up to 2000 kg. The low deadweight makes it easy to move the jib even under load. Thanks to their low headroom dimension, they can also be used wherever long hook paths are needed in spite of a low ceiling height.
D-GW wall-mounted slewing jib (up to 10000 kg)
Designed for use with Demag chain hoists or Demag rope hoists in connection with their low-headroom jib and high load capacity, D-GW wall-mounted slewing jibs are suitable for a wide variety of applications.
