Perfect handling of loads weighing up to 250 kg

DCM-Pro Manulift

Convenient operation and load handling with one hand

The DCM-Pro Manulift was developed for handling loads quickly and safely with only one hand. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit which is rigidly connected to the load handling attachment, the operator only needs one hand to operate the hoist and guide the load. Further strengths:

convenient operation and load guidance with one hand
for all Manulift load handling attachments or specially developed load handling attachments
simple replacement thanks to quick-change coupling
suitable for right-hand and left-hand operation

DemagcranesTV

Your Contact

Demag Cranes & Components GmbH

Postfach 67
58286 Wetter
Germany

Phone:

+49 (0) 2335 92-0

Fax:

+49 (0) 2335 92-7676

Email:

[email protected]

Contact

Product information

The benefits at a glance

Versatile performance

Two hoist speeds as standard
Versatile adaptability to any task
Simple exchange of the load handling device thanks to quick-change coupling
For right-hand and left-hand operation

High operating quality

Convenient single-handed handling and guidance of loads weighing up to 250 kg
Quick-change coupling for a variety of load handling attachments (load hooks, pantograph tongs, clamping and shaft grippers, parallel gripper systems, specifically developed load handling attachments)
Service-friendly thanks to diagnostics interface

High safety and reliability

24 V contactor control
FEM classification from 2m+ to 4m
Slipping clutch with speed monitoring
No brake adjustment
No load dropping thanks to slipping clutch arranged in front of the brake
Operating limit switches

Long service life

Gearbox, brake and slipping clutch maintenance-free for up to 10 years
Aluminum motor, gearbox and electrical cover parts provided with UV-resistant powder coating
Robust cylindrical-rotor motor with fan and separate DC brake beneath the electrical cover

Selection table

Demag DCM-Pro Manulift selection table

LC [kg]	Manulift DCM-Pro	Lifting speed [m/min]		Hook path [m]	FEM	Reev- ing	Weight [kg]
		Lifting speed [m/min]					for hook path
		50 Hz	60 Hz				2.8 m	4.3 m
80	1	8 / 2	9.6 / 2.4	2.8 and 4.3	4m	1/1	22	24
	2	16 / 4	19.2/4.8		4m		22	24
	5	24 / 6	28.8/7.2		4m		28	30
125	1	8 / 2	9.6 / 2.4		4m		22	24
	2	16 / 4	19.2/4.8		4m		22	24
	5	24 / 6	28.8/7.2		4m		28	30
200	2	8 / 2	9.6 / 2.4		3m		22	24
200 250	5	16 / 4	19.2/4.8		4m		28	30
250	2	8 / 2	9.6 / 2.4		2m+ ¹⁾		22	24

¹⁾ 2m+ corresponds to 1,900 hours at full load

Customer benefits at glance

Safety

Low-voltage control pendant thanks to 24 V contactor control system
Safety-related functions satisfy at least Performance Level c and Category 2 to EN ISO 13849-1

Minimum load sway

Smooth cross-travel starting and braking motions for low-sway load handling
Speeds and acceleration/braking rates can be modified by means of the control pendant, if required

Long service life

Generously specified gearbox. 2m+ (1,900 hours) for main load capacities and up to 4m (6,300 hours) for demanding applications
All sub-assemblies of the chain hoist are rated for a long service life, even under the most demanding conditions

Temperature range

Reliable operation from -20 °C to +45 °C without any reduction in the duty factor
Operation also possible up to 60 °C and more

Ergonomics

Length of control cable or position of control pendant can be adjusted without the need for any wiring
Length of control cable that is not needed can be stored under the service cover

High-performance motor

Hoist motor has large safety reserves to provide for reliable operation for many years
Can be used for switching cycles way beyond usual market levels

Pro-Hub function

Up to 90% higher rated lifting speed in reduced load range

Easy to service

Gearbox & slipping clutch maintenance-free for up to 10 years
Brake maintenance-free for up to 10 years (up to 5 years for DC 10–25)
Simple and rapid maintenance and repair of individual components thanks to the modular chain hoist design – cuts any downtime to a minimum

Variable speeds

Valuable and sensitive parts can be moved and positioned more smoothly and reliably
Variable button characteristic like a car accelerator pedal

Status display

Display for elapsed operating time counter and operating statuses
Always up-to-date for service purposes

Slipping clutch monitoring

Harmful continuous slipping eliminated thanks to speed monitoring
Reliable protection against extreme overload
Load securely held in any operating situation and cannot drop while hoist is at standstill, since brake is arranged in front of the slipping clutch in load-bearing arrangement